Veterinary Coagulation and Chemistry Combo Analyzer MSC-100V

ใบรับแจ้งรายการละเอียด เลขที่ 66-2-3-3-0005644
อ่านคำเตือนในฉลากและเอกสารกำกับเครื่องมือแพทย์ก่อนใช้

Warning and Precautions 
·         All used reagent discs should be treated as infectious waste.

·         A Waste may need special treatment before is discarded. For waste treatment methods, please follow the relevant guidelines for medical waste, infectious waste and industrial waste implemented by the competent authorities of the country and region.

·         Instruments may require special treatment before they are scrapped. For waste treatment methods, please follow the relevant guidelines for medical waste, infectious waste and industrial waste implemented by the competent authorities of the country and region.

·         Install the instrument correctly according to the installation environment and conditions described in this manual.

·         This instrument shall be installed by authorized people of Push Kang.

·         If you need to change the installation of this instrument, please contact the after-sales service agency or agent.

·         Do not use any flammable gas near the instrument to avoid explosion.

·         Do not trample, twist, pull wire and cable to avoid fire.

·          If the equipment is not used according to the method specified by the manufacturer, the protection provided by the equipment may be destroyed.

·         Please wear appropriate protective equipment when handling samples, maintaining operations, and disposing waste.

·         All patient samples should be treated as a potential source of infection. Please wear protective equipment and follow general precautions in local or national regulations.

·         If the user's skin is touched the patient's sample, please clean the contact area by water rinse at first.  If necessary, go to the hospital in time.

·         Wipe away any contaminants sprinkled on the instrument in time.

·         If you accidentally swallow any reagent or sample, please go to the hospital immediately.

·         If hazardous substances (pollutants such as reagents or samples) leak on the surface or enter the inside of the equipment, please take appropriate disinfection measures.

·         Do not use cleaning agents or disinfectants, such as alcohol, gasoline, and other flammable organic solvents, which cause danger due to chemical reaction with equipment parts or materials contained in the equipment.

·         If you have any questions about the compatibility of disinfectant or cleaning solvent with equipment parts or materials contained in the equipment, please contact our after-sales service agency or agent.

·         Do not start operating instruments until the cabin covers are closed

·         Do not put your fingers or hands inside any opening.

·         Do not touch any moving parts while the instrument is running.

·         Do not look directly at the lens of the scanner or it will cause eye injury.

·         Install and operate instruments according to instructions, the instrument model applicable to this manual is MSC100.

·         The operator of the instrument shall be the professional trained inspection personnel of medical and health institutions, and the relevant people shall be

·         professionally trained to operate the instrument.

·         Do not place the instrument in a position that is difficult for personnel to operate.

·         Handle the instrument gently by both sides and place them in a predetermined position.

·         The instrument should be installed on a stable operating table and close to a power socket with good ground connection condition.

·         Dust may accumulate on the surface of the instrument after long-term storage. Wipe the surface gently with a clean, soft cloth, and use a small amount of cleaning solvent if necessary. Cut off the power before cleaning the instrument. Cover the instrument when it is not in operation.

·         This instrument belongs to the company's unique patent, please use it together with the matching detection reagent produced by Push Kang.

·         Refer to the relevant instructions for the use and storage of reagents, quality control products and calibration products. To ensure the stability and reliability of the results, please use the reagents, quality control products and calibration products within the expiry date.

·         Please follow the procedure described in this manual to operate the instrument, and improper operation may produce incorrect results or lead to instrument failure.

·         Please maintain the instrument regularly in strict accordance with the provisions

·         of this manual, otherwise it may lead to instrument failure or affect the accuracy and precision of instrument testing.

·          Users are not allowed to disassemble or replace any parts of the instrument by yourselves. If you need to replace or repair, please contact our after-sales service agency or agent for operation by the after-sales service engineer.

·         If the result of retest is still out of control, please contact our after-sales service agency or agent immediately.

Contranidication : N/A